Materials list for a 12x14 deck
For a deck 14 feet along the house and 12 feet out, with 5.5 inch boards, a 1/8 inch gap, joists 16 inches on center and 10 percent waste. Change any of it in the calculator above.
| Item | Quantity | Cost |
|---|---|---|
| Deck boards, 5.5 in wide | 29 boards, 14 ft long | $386 |
| Joists | 12 boards, 12 ft long | $307 |
| Ledger and rim board | 2 boards, 14 ft long | $60 |
| Beam boards | 2 boards, 14 ft long | $60 |
| Posts | 3 | $127 |
| Footings | 3 | Not priced |
| Joist hangers | 12 | $41 |
| Deck screws | About 687, in 1 box of 1,000 | $41 |
| Total | About $1,022 |
Prices are store prices checked in October 2026, with all framing priced as treated 2x10 at $2.13 a foot. Change any price in the calculator to match your quote.
Fourteen foot stock for the decking, ledger, rim and beam, 12 foot stock for the joists. Not every yard keeps 14 foot deck boards in every material, so check before you plan around them.
What a 12x14 deck costs
About $1,022 in lumber and hardware, or $6 per square foot, before concrete, railing, stairs, flashing, stain and tax. HomeAdvisor puts labor at $15 to $35 per square foot, so a contractor-built 12x14 comes to about $3,542 to $6,902. Compare cedar and composite boards in the deck cost calculator.
What fits on a 12x14 deck
A 12x14 deck is two feet longer along the house than a 12x12, and that is enough to fit a table for six with a grill beside it. It is also the first size here with room for a sofa set and a grill at the same time.
Counting room to pull out chairs and walk past, a 12x14 deck holds a table for six (12 by 9 feet) and a grill with room to cook (5 by 5 feet). Set up for lounging instead, it holds a sofa, two chairs and a low table (10 by 8 feet) and a grill with room to cook (5 by 5 feet). These are rough planning sizes, so measure your own furniture.
The six-seat table fits with its long side running straight out from the house, leaving the last 5 feet along the wall for the grill. Turned the other way, along the house, the table and its chairs leave no room for the grill.
The next size up, 12x16, adds 24 square feet: room for two lounge chairs; a beam of two 2x12s instead of two 2x10s.
Framing a 12x14 deck
Joists run out from the house and span about 12 feet from the ledger to the beam: 12 of them at 16 inches on center, each 12 feet long. The table gives the smallest joist DCA 6 allows for that span.
| Species | 12 in on center | 16 in on center | 24 in on center |
|---|---|---|---|
| Southern Pine | 2x8 | 2x10 | 2x12 |
| Douglas fir-larch, hem-fir, spruce-pine-fir | 2x8 | 2x10 | 2x12 |
| Redwood, western cedar | 2x10 | 2x10 | 2x12 |
In Southern Pine at 16 inches, that is a 2x10. The ledger, and any joist or rim a railing post bolts to, must be at least 2x8.
With one beam, 3 posts no more than 8 feet apart put the beam span at 7 feet. At a 12 foot joist span, DCA 6 Table 3A allows a beam of two 2x10s in Southern Pine to span 7 ft 1 in, the smallest two-ply beam that reaches. A fourth post cuts the span to 4 ft 8 in, where two 2x8s are enough. The two 2x10s priced in the list are just what it takes.
For a 12 foot joist span, DCA 6 Table 5 puts 1/2 inch lag screws every 15 inches into a solid lumber band joist, about 13 along this 14 foot ledger, or through-bolts every 29 inches, about 7. No lead anchors, and no ledger on brick or stone veneer.
The longer beam span also moves the footings up a size in DCA 6 Table 4, from 21 inches round on a 12x12 to 24 inches here, because the span between posts passes 6 feet.
Deck boards on a 12x14 deck
26 rows of boards run along the house, across the joists. Each row is a single 14 foot board, so there are no joints to line up over joists. Laid on a diagonal, 5/4 wood boards need joists 12 inches apart, not 16: 15 joists instead of 12.
Railing and stairs
More than 30 inches up, a railing is required: 38 feet on the three open sides, about 8 railing posts and 82 balusters 1.5 inches wide, less the stair opening. See the baluster and stair calculators.
Footings and concrete
DCA 6 Table 4, for 12 foot joists and 7 feet between posts: footings 24 inches round or 21 inches square, 10 inches thick, on soil that bears 1,500 psf, under Southern Pine 6x6 posts up to 14 feet tall. Poured as a pad with a 12 inch pier up to the ground in 36 inch holes, the 3 beam footings take about 24 bags of 80 lb mix with 10 percent extra. Your frost line may call for deeper holes; the concrete footing calculator redoes the count.
Permits and code limits
Under the model code, only a deck of 200 square feet or less, no more than 30 inches up, not attached to the house and not serving the main exit door skips the permit. This deck bolts to the house, so it needs a permit under the model code even though 168 square feet is under the size limit. Built freestanding, low and away from the main door, a deck this size could qualify. Local rules vary, so ask your building department.
DCA 6 only covers decks that stick out from the house no farther than they run along it. A 12x14 deck runs 14 feet along the house and 12 feet out, so it is inside the limit. Turned the other way, 14 feet out from the house, it would not be. It also leaves out decks with snow loads over 40 psf, and hot tubs: water 3 feet deep weighs about 187 pounds per square foot, against the 40 psf live load its tables assume.
Before you build a 12x14 deck
Three posts carry the 14 foot beam with only an inch of span to spare for two 2x10s. Set the posts where the plan says: sliding one a few inches toward an end to clear a window well or a downspout puts the other span over the limit.
Other deck sizes
8x1010x1010x1212x1212x1412x1612x2014x1614x2016x1616x2020x20
Common questions
How many deck boards do I need for a 12x14 deck?
29 boards 14 feet long: 26 rows of 5.5 inch boards, plus 10 percent waste.
How many joists do I need for a 12x14 deck?
12 joists 12 feet long at 16 inches on center, counting the two end joists.
How many screws do I need for a 12x14 deck?
About 687, two wherever a board crosses a joist, plus 10 percent.
How much does a 12x14 deck cost in materials?
About $1,022 in pressure-treated lumber and hardware, or $3,542 to $6,902 built by a contractor.
How many posts does a 12x14 deck need?
Three under the beam, about 7 feet apart, plus the ledger on the house. A beam of two Southern Pine 2x10s may span 7 ft 1 in at a 12 foot joist span in DCA 6, so three posts work with an inch to spare.
Will a table for six fit on a 12x14 deck?
Yes, with the table running out from the house. A six-seat table with room for chairs takes about 12 by 9 feet, which leaves a 5 foot strip along the house for a grill.
Tools for this job
Each link opens an Amazon search for that item. As an Amazon Associate I earn from qualifying purchases.
- Chalk line. Snaps a straight line for the first board and for trimming the board ends.
- Speed square. Marks square cuts on deck boards and joists.
- Deck board spacers. Keep the same gap between every board.
- Deck board straightening tool. Pulls a bowed board tight while you screw it down.
- Joist tape. Covers the tops of the joists so water does not sit on the wood.
- Driver bits. Spares for the drill, because deck screws wear bits out fast.
Sources
- International Residential Code 2021, Chapter 5: decks (R507)
- American Wood Council, DCA 6: Prescriptive Residential Wood Deck Construction Guide
- International Residential Code 2021, Chapter 3: landings and stairs (R311.3, R311.7) and guards (R312)
- International Residential Code 2021, Chapter 1: work exempt from permit (R105.2)
- McCoy's Building Supply: deck board prices, treated pine and composite
- McCoy's Building Supply: pressure-treated lumber and post prices
- McCoy's Building Supply: Simpson Strong-Tie LUS210Z joist hanger
- McCoy's Building Supply: deck screws, #10 x 2-1/2 in, box of 1,000
- HomeAdvisor: cost to build a deck, with labor rates
Facts on this page were last checked against these sources in October 2026.