About Pitch & Plank
Free calculators for roofing, deck and yard projects, built for homeowners, DIY builders and contractors. Every answer shows the math behind it.
Who runs this site
Pitch & Plank is run by Steven. You can write to Steven at [email protected].
Why it exists
I wanted calculators that show their math, so you can check the numbers before you buy materials.
A materials list is only useful if you can trust it. A wrong rafter length wastes a board, and a wrong bundle count means a second trip to the store or a pile of returns. So every page here shows its formula, works one example by hand, and names the code book, maker or price list each rule and number comes from. You should be able to check any answer with a pencil before you spend money on it.
How the numbers are checked
- The formula is on the page. Each calculator lists the steps it uses to get from your measurements to the answer.
- One example is worked by hand. Each calculator page walks through a full example with the real numbers, so you can follow it and land on the same answer.
- The code is tested against hand-worked answers. The site's source code includes a set of checks that compare each calculator with answers worked out by hand: for example, that a 6 in 12 roof comes out at 26.57 degrees, and that a deck 16 feet long and 12 feet deep needs 29 deck boards.
- Rules come from named sources. Building code limits come from the 2021 International Residential Code, deck spans, beams and footings from the American Wood Council's DCA 6 deck guide, and fall protection rules from OSHA. Product numbers, such as bundles per square or bags per cubic yard, come from the makers' own data sheets.
- Sources are dated. Every page lists the sources it uses and the month they were last checked. The facts were last checked in October 2026, and the starting prices in October 2026. Prices change by region and season, so every price can be changed in the calculator.
Found a number that looks wrong? Email [email protected] with the page and what you typed in.
How the site is paid for
The calculators are free, with no sign-up. The site may show ads from Google AdSense, and some tool links go to Amazon as affiliate links. Neither changes the math: the formulas, sources and results are the same for everyone, whatever you click.
How the calculators work
Every calculator runs in your browser. Nothing you type is sent anywhere or saved.
What the results are
The results are estimates for planning and ordering. They are not engineering advice, and they do not replace your local building code, a permit review, or the instructions that come with your materials.
- Lumber, shingles and concrete vary by maker. Check the coverage printed on the product.
- Structural sizes such as joists, beams, rafters and footings depend on loads and local rules that these calculators do not know.
- Always confirm quantities with your supplier before you order, and measure twice before you cut.
Working safely
Roof work and deck framing involve heights, power tools and heavy loads. Use fall protection on roofs, and hire a licensed professional for anything you are not sure about.