Pitch & Plank

Deck material calculator

12x12 deck materials list

A 12 by 12 foot deck covers 144 square feet. Here is the materials list and what it costs, with a calculator you can adjust.

Measurements

Deck length

Along the house

Deck width

Out from the house

in

Actual width. A 5/4x6 or 2x6 is 5.5 in.

in

1/8 in is 0.125

24 in only works with 2 in thick boards

%

Decks deeper than about 14 ft usually need 2

ft

Along each beam. Enter 0 to skip posts and beams.

$ per ft

Treated pine. A 16 ft board at $15.19 is $0.95 a foot. Store price checked October 2026.

$ per ft

Joists, ledger, rim and beams. A treated 2x10, 12 ft long, at $25.59.

$ each

A treated 6x6, 8 ft long

$ each
$ per box

A box of 1,000. Enter 0 for any price to leave it out.

Results

Decking to buy
29 boards, 12 ft long
Deck area
144 sq ft
Rows of boards
26
Decking, with waste
343 ft
Joists
10 joists, 12 ft long
Ledger and rim board
24 ft
Beam boards, two per beam
24 ft
Deck screws
572
Joist hangers
10
Posts and footings
3
Estimated materials cost
About $891
Decking cost
$331
Framing lumber cost
$358
Posts, hangers and screws cost
$202
House12' 0"12' 0"

Materials list for a 12x12 deck

For a deck 12 feet along the house and 12 feet out, with 5.5 inch boards, a 1/8 inch gap, joists 16 inches on center and 10 percent waste. Change any of it in the calculator above.

ItemQuantityCost
Deck boards, 5.5 in wide29 boards, 12 ft long$331
Joists10 boards, 12 ft long$256
Ledger and rim board2 boards, 12 ft long$51
Beam boards2 boards, 12 ft long$51
Posts3$127
Footings3Not priced
Joist hangers10$34
Deck screwsAbout 572, in 1 box of 1,000$41
TotalAbout $891

Prices are store prices checked in October 2026, with all framing priced as treated 2x10 at $2.13 a foot. Change any price in the calculator to match your quote.

Everything but the posts is 12 foot stock: deck boards, joists, ledger, rim and both beam boards. Twelve feet is the one length that covers both directions.

What a 12x12 deck costs

About $891 in lumber and hardware, or $6 per square foot, before concrete, railing, stairs, flashing, stain and tax. HomeAdvisor puts labor at $15 to $35 per square foot, so a contractor-built 12x12 comes to about $3,051 to $5,931. Compare cedar and composite boards in the deck cost calculator.

What fits on a 12x12 deck

A 12x12 deck gives a round table for four room on every side, with about 2 feet to spare each way. At 144 square feet it is a step up from a 10x10 for dining, but still a one-area deck.

Counting room to pull out chairs and walk past, a 12x12 deck holds a table for six (12 by 9 feet). Set up for lounging instead, it holds a sofa, two chairs and a low table (10 by 8 feet). A table for eight would need 14 by 10 feet, which this deck does not have. These are rough planning sizes, so measure your own furniture.

You can tuck a grill into a corner by the stairs and accept tighter chair space on that side, or step up to a 12x16, which fits a table, a grill and lounge chairs.

The next size up, 12x14, adds 24 square feet: room for a grill with room to cook.

Framing a 12x12 deck

Joists run out from the house and span about 12 feet from the ledger to the beam: 10 of them at 16 inches on center, each 12 feet long. The table gives the smallest joist DCA 6 allows for that span.

Species12 in on center16 in on center24 in on center
Southern Pine2x82x102x12
Douglas fir-larch, hem-fir, spruce-pine-fir2x82x102x12
Redwood, western cedar2x102x102x12

In Southern Pine at 16 inches, that is a 2x10. The ledger, and any joist or rim a railing post bolts to, must be at least 2x8.

With one beam, 3 posts no more than 8 feet apart put the beam span at 6 feet. At a 12 foot joist span, DCA 6 Table 3A allows a beam of two 2x10s in Southern Pine to span 7 ft 1 in, the smallest two-ply beam that reaches. A fourth post cuts the span to 4 feet, where two 2x6s are enough. The two 2x10s priced in the list are just what it takes.

For a 12 foot joist span, DCA 6 Table 5 puts 1/2 inch lag screws every 15 inches into a solid lumber band joist, about 11 along this 12 foot ledger, or through-bolts every 29 inches, about 6. No lead anchors, and no ledger on brick or stone veneer.

Twelve feet is where 2x8 joists stop working at 16 inches: Southern Pine 2x8s span 11 ft 10 in, 2 inches short. Use 2x10s at 16 inches, or keep the 2x8s and move them to 12 inches. A beam of two 2x8s misses by an inch here as well, 5 ft 11 in against 6 feet between posts.

Deck boards on a 12x12 deck

26 rows of boards run along the house, across the joists. Each row is a single 12 foot board, so there are no joints to line up over joists. Laid on a diagonal, 5/4 wood boards need joists 12 inches apart, not 16: 13 joists instead of 10.

Railing and stairs

More than 30 inches up, a railing is required: 36 feet on the three open sides, about 7 railing posts and 78 balusters 1.5 inches wide, less the stair opening. See the baluster and stair calculators.

Footings and concrete

DCA 6 Table 4, for 12 foot joists and 6 feet between posts: footings 21 inches round or 18 inches square, 8 inches thick, on soil that bears 1,500 psf, under Southern Pine 6x6 posts up to 14 feet tall. Poured as a pad with a 12 inch pier up to the ground in 36 inch holes, the 3 beam footings take about 19 bags of 80 lb mix with 10 percent extra. Your frost line may call for deeper holes; the concrete footing calculator redoes the count.

Permits and code limits

Under the model code, only a deck of 200 square feet or less, no more than 30 inches up, not attached to the house and not serving the main exit door skips the permit. This deck bolts to the house, so it needs a permit under the model code even though 144 square feet is under the size limit. Built freestanding, low and away from the main door, a deck this size could qualify. Local rules vary, so ask your building department.

DCA 6 only covers decks that stick out from the house no farther than they run along it. A square 12x12 sits exactly at that limit. It also leaves out decks with snow loads over 40 psf, and hot tubs: water 3 feet deep weighs about 187 pounds per square foot, against the 40 psf live load its tables assume.

Before you build a 12x12 deck

Square decks look best when the stairs line up with something, such as the door or a garden path. On a 12x12, a stair opening at least 36 inches wide, as DCA 6 asks, leaves about 9 feet of railing on that side.

Other deck sizes

8x1010x1010x1212x1212x1412x1612x2014x1614x2016x1616x2020x20

Common questions

How many deck boards do I need for a 12x12 deck?

29 boards 12 feet long: 26 rows of 5.5 inch boards, plus 10 percent waste.

How many joists do I need for a 12x12 deck?

10 joists 12 feet long at 16 inches on center, counting the two end joists.

How many screws do I need for a 12x12 deck?

About 572, two wherever a board crosses a joist, plus 10 percent.

How much does a 12x12 deck cost in materials?

About $891 in pressure-treated lumber and hardware, or $3,051 to $5,931 built by a contractor.

What size joists for a 12x12 deck?

2x10 at 16 inches on center in Southern Pine, Douglas fir-larch, hem-fir or spruce-pine-fir, under DCA 6. A 2x8 also works at 12 inches in those species. In redwood or western cedar, use 2x10s at 16 inches or 2x12s at 24.

Is a 12x12 deck big enough for a grill and a table?

Only just. A round table for four with chairs takes about 10 by 10 feet and a grill with room to cook about 5 by 5, so side by side they need 15 feet. On a 12x12 the grill ends up in the chair space; a 12x16 fits both.

Tools for this job

Each link opens an Amazon search for that item. As an Amazon Associate I earn from qualifying purchases.

Sources

Facts on this page were last checked against these sources in October 2026.

Related calculators