Materials list for a 10x12 deck
For a deck 12 feet along the house and 10 feet out, with 5.5 inch boards, a 1/8 inch gap, joists 16 inches on center and 10 percent waste. Change any of it in the calculator above.
| Item | Quantity | Cost |
|---|---|---|
| Deck boards, 5.5 in wide | 25 boards, 12 ft long | $285 |
| Joists | 10 boards, 10 ft long | $213 |
| Ledger and rim board | 2 boards, 12 ft long | $51 |
| Beam boards | 2 boards, 12 ft long | $51 |
| Posts | 3 | $127 |
| Footings | 3 | Not priced |
| Joist hangers | 10 | $34 |
| Deck screws | About 484, in 1 box of 1,000 | $41 |
| Total | About $802 |
Prices are store prices checked in October 2026, with all framing priced as treated 2x10 at $2.13 a foot. Change any price in the calculator to match your quote.
The order has just two lengths: 12 foot stock for the deck boards, ledger, rim and beam, and 10 foot stock for the joists.
What a 10x12 deck costs
About $802 in lumber and hardware, or $7 per square foot, before concrete, railing, stairs, flashing, stain and tax. HomeAdvisor puts labor at $15 to $35 per square foot, so a contractor-built 10x12 comes to about $2,602 to $5,002. Compare cedar and composite boards in the deck cost calculator.
What fits on a 10x12 deck
A 10x12 deck adds two feet along the house to a 10x10. Those two feet let a small table for two sit beside a grill, or two lounge chairs share the deck with one, which a 10x10 cannot do.
Counting room to pull out chairs and walk past, a 10x12 deck holds a table for six (12 by 9 feet). Set up for lounging instead, it holds a sofa, two chairs and a low table (10 by 8 feet). A table for eight would need 14 by 10 feet, which this deck does not have. These are rough planning sizes, so measure your own furniture.
Run the 12 foot side along the house, so more of the deck sits in front of the door. A round table for four fits with about 2 feet to spare along the house; push it to one end and the leftover strip takes a bench or a row of planters.
The next size up, 12x12, adds 24 square feet: 2x10 joists instead of 2x8s; a beam of two 2x10s instead of two 2x8s.
Framing a 10x12 deck
Joists run out from the house and span about 10 feet from the ledger to the beam: 10 of them at 16 inches on center, each 10 feet long. The table gives the smallest joist DCA 6 allows for that span.
| Species | 12 in on center | 16 in on center | 24 in on center |
|---|---|---|---|
| Southern Pine | 2x8 | 2x8 | 2x10 |
| Douglas fir-larch, hem-fir, spruce-pine-fir | 2x8 | 2x8 | 2x10 |
| Redwood, western cedar | 2x8 | 2x8 | 2x10 |
In Southern Pine at 16 inches, that is a 2x8. The ledger, and any joist or rim a railing post bolts to, must be at least 2x8.
With one beam, 3 posts no more than 8 feet apart put the beam span at 6 feet. At a 10 foot joist span, DCA 6 Table 3A allows a beam of two 2x8s in Southern Pine to span 6 ft 6 in, the smallest two-ply beam that reaches. A fourth post cuts the span to 4 feet, where two 2x6s are enough. The two 2x10s priced in the list are more beam than this span needs.
For a 10 foot joist span, DCA 6 Table 5 puts 1/2 inch lag screws every 18 inches into a solid lumber band joist, about 9 along this 12 foot ledger, or through-bolts every 34 inches, about 6. No lead anchors, and no ledger on brick or stone veneer.
The whole frame can be 2x8: joists, beam, ledger and rim. With 2x8 joists in hangers, DCA 6 asks for hangers rated for at least 500 pounds and at least 60 percent as deep as the ledger they hang from.
Deck boards on a 10x12 deck
22 rows of boards run along the house, across the joists. Each row is a single 12 foot board, so there are no joints to line up over joists. Laid on a diagonal, 5/4 wood boards need joists 12 inches apart, not 16: 13 joists instead of 10.
Railing and stairs
More than 30 inches up, a railing is required: 32 feet on the three open sides, about 7 railing posts and 70 balusters 1.5 inches wide, less the stair opening. See the baluster and stair calculators.
Footings and concrete
DCA 6 Table 4, for 10 foot joists and 6 feet between posts: footings 18 inches round or 16 inches square, 7 inches thick, on soil that bears 1,500 psf, under Southern Pine 6x6 posts up to 14 feet tall. Poured as a pad with a 12 inch pier up to the ground in 36 inch holes, the 3 beam footings take about 17 bags of 80 lb mix with 10 percent extra. Your frost line may call for deeper holes; the concrete footing calculator redoes the count.
Permits and code limits
Under the model code, only a deck of 200 square feet or less, no more than 30 inches up, not attached to the house and not serving the main exit door skips the permit. This deck bolts to the house, so it needs a permit under the model code even though 120 square feet is under the size limit. Built freestanding, low and away from the main door, a deck this size could qualify. Local rules vary, so ask your building department.
DCA 6 only covers decks that stick out from the house no farther than they run along it. A 10x12 deck runs 12 feet along the house and 10 feet out, so it is inside the limit. Turned the other way, 12 feet out from the house, it would not be. It also leaves out decks with snow loads over 40 psf, and hot tubs: water 3 feet deep weighs about 187 pounds per square foot, against the 40 psf live load its tables assume.
Before you build a 10x12 deck
With a round table for four in place, only 2 feet of the 12 foot length is left over, too little for a path past the chairs. Put the stairs at whichever end is closest to the door, so nobody has to cross the table area to reach the yard. The deck also serves as the landing outside the door, which the code wants at least as wide as the door and 36 inches deep, so keep that patch clear of furniture.
Other deck sizes
8x1010x1010x1212x1212x1412x1612x2014x1614x2016x1616x2020x20
Common questions
How many deck boards do I need for a 10x12 deck?
25 boards 12 feet long: 22 rows of 5.5 inch boards, plus 10 percent waste.
How many joists do I need for a 10x12 deck?
10 joists 10 feet long at 16 inches on center, counting the two end joists.
How many screws do I need for a 10x12 deck?
About 484, two wherever a board crosses a joist, plus 10 percent.
How much does a 10x12 deck cost in materials?
About $802 in pressure-treated lumber and hardware, or $2,602 to $5,002 built by a contractor.
Should a 10x12 deck run 12 feet along the house or 12 feet out?
Along the house. DCA 6, the American Wood Council deck guide, only covers decks that stick out from the house no farther than they run along it, so 12 feet out by 10 feet along would fall outside it.
Can a 10x12 deck be framed entirely with 2x8s?
Yes, in DCA 6 terms. 2x8 joists at 16 inches on center span 10 feet in all three species groups, and a beam of two Southern Pine 2x8s may span 6 ft 6 in at that joist span, more than the 6 feet between three posts.
Tools for this job
Each link opens an Amazon search for that item. As an Amazon Associate I earn from qualifying purchases.
- Chalk line. Snaps a straight line for the first board and for trimming the board ends.
- Speed square. Marks square cuts on deck boards and joists.
- Deck board spacers. Keep the same gap between every board.
- Deck board straightening tool. Pulls a bowed board tight while you screw it down.
- Joist tape. Covers the tops of the joists so water does not sit on the wood.
- Driver bits. Spares for the drill, because deck screws wear bits out fast.
Sources
- International Residential Code 2021, Chapter 5: decks (R507)
- American Wood Council, DCA 6: Prescriptive Residential Wood Deck Construction Guide
- International Residential Code 2021, Chapter 3: landings and stairs (R311.3, R311.7) and guards (R312)
- International Residential Code 2021, Chapter 1: work exempt from permit (R105.2)
- McCoy's Building Supply: deck board prices, treated pine and composite
- McCoy's Building Supply: pressure-treated lumber and post prices
- McCoy's Building Supply: Simpson Strong-Tie LUS210Z joist hanger
- McCoy's Building Supply: deck screws, #10 x 2-1/2 in, box of 1,000
- HomeAdvisor: cost to build a deck, with labor rates
Facts on this page were last checked against these sources in October 2026.