Houses with a 3,000 square foot roof
A 3,000 square foot roof is a large house: a one-story of about 2,500 square feet, or a two-story of about 5,000. Roofs this size usually have several sections, with hips, valleys and a garage.
The ridge, drip edge and vent numbers below are for that one-story house: about 61 by 41 feet, under a 6 in 12 roof with 12 inch overhangs.
Shingle order for a 3,000 square foot roof
With 10 percent waste, architectural shingles at 3 bundles a square, #15 felt and 4 nails a shingle:
| Item | Quantity | Cost |
|---|---|---|
| Shingle bundles, architectural | 99 | $4,454 |
| Squares | 30 on the roof, 33 to order | |
| Underlayment, #15 felt | 9 rolls | $315 |
| Roofing nails | About 8,448 | Not priced |
| Total | About $4,769 |
3,300 square feet with the waste is 33 squares, so 33 × 3 = 99 bundles, and 3,300 ÷ 400 = 8.25, rounded up to 9 rolls of felt. Prices: $44.99 a bundle and $34.99 a roll. The starting prices come from the store listings and cost guides under Sources, last checked in October 2026. Prices vary by region and season, so change any price to match your store or your quote.
IKO packs its Cambridge architectural shingles 56 bundles to a pallet, so 99 bundles is 1 full pallet plus 43 bundles. Other makers pack differently.
How waste and shingle type change the order
Ten percent waste suits a simple gable roof. With hips and valleys, plan on about 15 percent, which makes this order 104 bundles instead of 99.
| Waste | Squares to order | Bundles | Architectural shingles | Three-tab shingles |
|---|---|---|---|---|
| None | 30 | 90 | $4,049 | $3,869 |
| 10%, simple gable roof | 33 | 99 | $4,454 | $4,256 |
| 15%, hips and valleys | 34.5 | 104 | $4,679 | $4,471 |
Three-tab shingles also come 3 bundles to a square, so the count holds and only the price changes. Shingles packed 4 bundles to a square would take 132.
Underlayment and nails for 3,000 square feet
9 rolls of #15 felt ($315), 17 rolls of #30 felt ($595) or 4 rolls of synthetic ($364). From 2 in 12 up to 4 in 12, the code wants a double layer, about 17 rolls of #15 felt. Nails: about 8,448 at 4 a shingle, or 12,672 at 6 for high wind; three-tab takes 10,560 or 15,840.
Ridge cap and drip edge on a 3,000 square foot roof
These go by length, not area. On the 61 by 41 foot house above, a gable roof has one long ridge; a hip roof has a short ridge and four hips that need cap too.
| Roof shape | Ridge | Hips | Cap bundles, 20 ft each | Cap cost | Drip edge |
|---|---|---|---|---|---|
| Gable | 63 ft | None | 4 | $300 | 221 ft |
| Hip | 20 ft | 128 ft | 8 | $600 | 211 ft |
Cap is $74.99 a bundle. The code wants drip edge on every eave and rake, lapped 2 inches, so buy a little extra.
Attic vents under 3,000 square feet of roof
The code sizes attic vents by the floor under them: 1 square foot of open vent for every 150 of attic, which is 2,377 square inches over the 2,476 square foot house above. It is 1,189 if 40 to 50 percent of the vents sit within 3 feet of the ridge and the rest low, plus a ceiling vapor retarder in climate zones 6 to 8. Check the net free area printed on each vent's box.
Is 3,000 square feet your roof or your floor?
This page is for 3,000 square feet of sloped roof. A roof is bigger than the floor under it, so the table works both ways.
| Roof pitch | Ground a 3,000 sq ft roof covers | Roof over a 3,000 sq ft floor | Bundles for that roof |
|---|---|---|---|
| 4 in 12 | 2,846 sq ft | 3,402 sq ft | 113 |
| 6 in 12 | 2,683 sq ft | 3,609 sq ft | 120 |
| 8 in 12 | 2,496 sq ft | 3,879 sq ft | 129 |
| 10 in 12 | 2,305 sq ft | 4,201 sq ft | 139 |
| 12 in 12 | 2,121 sq ft | 4,565 sq ft | 151 |
The floor column is a one-story house one and a half times as long as it is wide, with 12 inch overhangs. With 3,000 square feet of floor and a 6 in 12 roof, the roof is about 3,609 square feet and takes 120 bundles, 21 more than the list above. On a two-story house with 1,500 square feet a level, it is about 1,858 square feet and 62 bundles. The roof area calculator measures your own.
What a 3,000 square foot shingle roof costs
Shingles and felt come to about $4,769, or $4,571 with three-tab, before nails, cap, drip edge, flashing, vents, delivery and tax. Installed, HomeAdvisor puts an asphalt shingle roof at $4 to $12 per square foot, which is $12,000 to $36,000 here, plus $3,000 to $15,000 for the tear-off. The 3,000 square foot roof cost page breaks that down.
The job at 3,000 square feet
At about 33 squares, a crew works through it over several days. The tear-off fills a large dumpster, and the shingles come on two pallets. Ask how many people the roofer will send; a bigger crew finishes sooner and leaves the roof open to weather for less time.
Before you order
On a roof this size, small prices add up. Ridge cap, drip edge, starter strip, vents and flashing are not in the shingle count, and they add up to a real share of the material bill. Use the ridge cap and drip edge numbers on this page as a start, then measure your own.
Other roof sizes
The next size down, 2,500 square feet, takes 83 bundles. The next size up, 3,500 square feet, takes 116 bundles.
1,000 sq ft1,200 sq ft1,500 sq ft1,600 sq ft1,800 sq ft2,000 sq ft2,200 sq ft2,400 sq ft2,500 sq ft3,500 sq ft4,000 sq ft
Common questions
How many bundles of shingles do I need for a 3,000 square foot roof?
99 bundles at 3 a square with 10 percent waste, or 104 with 15 percent for hips and valleys.
How much do shingles cost for a 3,000 square foot roof?
About $4,769 for architectural shingles and felt, or $4,571 with three-tab, at store prices checked in October 2026. Nails, flashing, ridge cap and labor are extra.
How many bundles of ridge cap do I need for a 3,000 square foot roof?
About 4 on a plain gable over a 61 by 41 foot house, with a 63 foot ridge, or 8 as a hip roof, with 148 feet of ridge and hips. Measure yours and enter it in the calculator.
How many pallets of shingles for a 3,000 square foot roof?
About two. With 10 percent waste the roof takes 99 bundles, and IKO packs its Cambridge shingles 56 bundles to a pallet, so 1 full pallet plus 43 bundles. Other brands pack differently.
How long does a 3,000 square foot roof take?
Longer than the two to three days HomeAdvisor gives for a medium-sized roof. Expect several days with a normal crew, more with steep pitches, many valleys or bad weather.
How many bundles of shingles do I need for a 3,000 square foot house?
About 120 with 10 percent waste for a one-story house, because 3,000 square feet of floor under a 6 in 12 roof with 12 inch overhangs has about 3,609 square feet of roof. A steeper roof takes more.
Tools for this job
Each link opens an Amazon search for that item. As an Amazon Associate I earn from qualifying purchases.
- Chalk line. Snaps straight lines so every row of shingles stays even.
- Roofing hatchet. Drives roofing nails and has a gauge that sets how much of each shingle shows.
- Hook blades for a utility knife. Cut shingles from the top without slicing what is underneath.
- Flat pry bar. Lifts old shingles and pulls nails.
- Roof safety harness kit. Ties you to an anchor on the roof so a slip does not turn into a fall.
Sources
- International Residential Code 2021, Chapter 9: roof drainage (R903) and roof coverings (R905)
- GAF Timberline HDZ specifications (architectural shingles)
- GAF Royal Sovereign specifications (three-tab shingles)
- McCoy's Building Supply: roof shingle prices
- McCoy's Building Supply: roofing underlayment prices
- McCoy's Building Supply: GAF TimberTex hip and ridge cap shingles
- International Residential Code 2021, Chapter 8: attic ventilation (R806)
- IKO Cambridge technical data sheet (architectural shingles, bundles per pallet)
- HomeAdvisor: shingle roof replacement cost, with removal of the old roof
Facts on this page were last checked against these sources in October 2026.